Bitcoin Core v0.9.1
- Version: v0.9.1
- Tag: v0.9.1
- Release Date: 2014-03-19
- Docker Pull Command:
docker pull ghcr.io/mocacinno/mocacinno/bitcoin_core_docker:v9.1docker pull mocacinno/btc_core:v9.1
- Compiled by: Mocacinno
- Changelog: View Changelog
comments about the image
- used a manually compiled boost 1.57.0 instead of the system’s boost version
- switched to openssl 1.0.0
- had to patch posix_logger.h and chainparams.cpp
flags and parameters
starting the daemon
bash-4.4$ bitcoind -?
Bitcoin Core Daemon version v0.9.1.0-g026a939bb6834-beta
Usage:
bitcoind [options] Start Bitcoin server
Usage (deprecated, use bitcoin-cli):
bitcoind [options] <command> [params] Send command to Bitcoin server
bitcoind [options] help List commands
bitcoind [options] help <command> Get help for a command
Options:
-? This help message
-conf=<file> Specify configuration file (default: bitcoin.conf)
-datadir=<dir> Specify data directory
-testnet Use the test network
-pid=<file> Specify pid file (default: bitcoind.pid)
-gen Generate coins (default: 0)
-dbcache=<n> Set database cache size in megabytes (4 to 4096, default: 100)
-timeout=<n> Specify connection timeout in milliseconds (default: 5000)
-proxy=<ip:port> Connect through SOCKS proxy
-socks=<n> Select SOCKS version for -proxy (4 or 5, default: 5)
-onion=<ip:port> Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy)
-dns Allow DNS lookups for -addnode, -seednode and -connect
-port=<port> Listen for connections on <port> (default: 8333 or testnet: 18333)
-maxconnections=<n> Maintain at most <n> connections to peers (default: 125)
-addnode=<ip> Add a node to connect to and attempt to keep the connection open
-connect=<ip> Connect only to the specified node(s)
-seednode=<ip> Connect to a node to retrieve peer addresses, and disconnect
-externalip=<ip> Specify your own public address
-onlynet=<net> Only connect to nodes in network <net> (IPv4, IPv6 or Tor)
-discover Discover own IP address (default: 1 when listening and no -externalip)
-checkpoints Only accept block chain matching built-in checkpoints (default: 1)
-listen Accept connections from outside (default: 1 if no -proxy or -connect)
-bind=<addr> Bind to given address and always listen on it. Use [host]:port notation for IPv6
-dnsseed Find peers using DNS lookup (default: 1 unless -connect)
-banscore=<n> Threshold for disconnecting misbehaving peers (default: 100)
-bantime=<n> Number of seconds to keep misbehaving peers from reconnecting (default: 86400)
-maxreceivebuffer=<n> Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
-maxsendbuffer=<n> Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)
-debug=<category> Output debugging information (default: 0, supplying <category> is optional)
If <category> is not supplied, output all debugging information.
<category> can be: addrman, alert, coindb, db, lock, rand, rpc, selectcoins, mempool, net.
-logtimestamps Prepend debug output with timestamp (default: 1)
-shrinkdebugfile Shrink debug.log file on client startup (default: 1 when no -debug)
-printtoconsole Send trace/debug info to console instead of debug.log file
-regtest Enter regression test mode, which uses a special chain in which blocks can be solved instantly.
This is intended for regression testing tools and app development.
-server Accept command line and JSON-RPC commands
-daemon Run in the background as a daemon and accept commands
-rpcuser=<user> Username for JSON-RPC connections
-rpcpassword=<pw> Password for JSON-RPC connections
-rpcport=<port> Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332)
-rpcallowip=<ip> Allow JSON-RPC connections from specified IP address
-rpcthreads=<n> Set the number of threads to service RPC calls (default: 4)
-blocknotify=<cmd> Execute command when the best block changes (%s in cmd is replaced by block hash)
-alertnotify=<cmd> Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)
-keypool=<n> Set key pool size to <n> (default: 100)
-checkblocks=<n> How many blocks to check at startup (default: 288, 0 = all)
-checklevel=<n> How thorough the block verification is (0-4, default: 3)
-txindex Maintain a full transaction index (default: 0)
-loadblock=<file> Imports blocks from external blk000??.dat file
-reindex Rebuild block chain index from current blk000??.dat files
-par=<n> Set the number of script verification threads (up to 16, 0 = auto, <0 = leave that many cores free, default: 0)
Wallet options:
-disablewallet Do not load the wallet and disable wallet RPC calls
-paytxfee=<amt> Fee per kB to add to transactions you send
-rescan Rescan the block chain for missing wallet transactions
-zapwallettxes Clear list of wallet transactions (diagnostic tool; implies -rescan)
-salvagewallet Attempt to recover private keys from a corrupt wallet.dat
-upgradewallet Upgrade wallet to latest format
-wallet=<file> Specify wallet file (within data directory)
-walletnotify=<cmd> Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)
-spendzeroconfchange Spend unconfirmed change when sending transactions (default: 1)
Block creation options:
-blockminsize=<n> Set minimum block size in bytes (default: 0)
-blockmaxsize=<n> Set maximum block size in bytes (default: 750000)
-blockprioritysize=<n> Set maximum size of high-priority/low-fee transactions in bytes (default: 50000)
SSL options: (see the Bitcoin Wiki for SSL setup instructions)
-rpcssl Use OpenSSL (https) for JSON-RPC connections
-rpcsslcertificatechainfile=<file.cert> Server certificate file (default: server.cert)
-rpcsslprivatekeyfile=<file.pem> Server private key (default: server.pem)
-rpcsslciphers=<ciphers> Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH)
RPC client options:
-rpcconnect=<ip> Send commands to node running on <ip> (default: 127.0.0.1)
-rpcport=<port> Connect to JSON-RPC on <port> (default: 8332 or testnet: 18332)
-rpcwait Wait for RPC server to start
-rpcuser=<user> Username for JSON-RPC connections
-rpcpassword=<pw> Password for JSON-RPC connections
using bitcoind
bash-4.4$ bitcoin-cli help
addmultisigaddress nrequired ["key",...] ( "account" )
addnode "node" "add|remove|onetry"
backupwallet "destination"
createmultisig nrequired ["key",...]
createrawtransaction [{"txid":"id","vout":n},...] {"address":amount,...}
decoderawtransaction "hexstring"
decodescript "hex"
dumpprivkey "bitcoinaddress"
dumpwallet "filename"
encryptwallet "passphrase"
getaccount "bitcoinaddress"
getaccountaddress "account"
getaddednodeinfo dns ( "node" )
getaddressesbyaccount "account"
getbalance ( "account" minconf )
getbestblockhash
getblock "hash" ( verbose )
getblockcount
getblockhash index
getblocktemplate ( "jsonrequestobject" )
getconnectioncount
getdifficulty
getgenerate
gethashespersec
getinfo
getmininginfo
getnettotals
getnetworkhashps ( blocks height )
getnewaddress ( "account" )
getpeerinfo
getrawchangeaddress
getrawmempool ( verbose )
getrawtransaction "txid" ( verbose )
getreceivedbyaccount "account" ( minconf )
getreceivedbyaddress "bitcoinaddress" ( minconf )
gettransaction "txid"
gettxout "txid" n ( includemempool )
gettxoutsetinfo
getunconfirmedbalance
getwork ( "data" )
help ( "command" )
importprivkey "bitcoinprivkey" ( "label" rescan )
importwallet "filename"
keypoolrefill ( newsize )
listaccounts ( minconf )
listaddressgroupings
listlockunspent
listreceivedbyaccount ( minconf includeempty )
listreceivedbyaddress ( minconf includeempty )
listsinceblock ( "blockhash" target-confirmations )
listtransactions ( "account" count from )
listunspent ( minconf maxconf ["address",...] )
lockunspent unlock [{"txid":"txid","vout":n},...]
move "fromaccount" "toaccount" amount ( minconf "comment" )
ping
sendfrom "fromaccount" "tobitcoinaddress" amount ( minconf "comment" "comment-to" )
sendmany "fromaccount" {"address":amount,...} ( minconf "comment" )
sendrawtransaction "hexstring" ( allowhighfees )
sendtoaddress "bitcoinaddress" amount ( "comment" "comment-to" )
setaccount "bitcoinaddress" "account"
setgenerate generate ( genproclimit )
settxfee amount
signmessage "bitcoinaddress" "message"
signrawtransaction "hexstring" ( [{"txid":"id","vout":n,"scriptPubKey":"hex","redeemScript":"hex"},...] ["privatekey1",...] sighashtype )
stop
submitblock "hexdata" ( "jsonparametersobject" )
validateaddress "bitcoinaddress"
verifychain ( checklevel numblocks )
verifymessage "bitcoinaddress" "signature" "message"
navigation
For more information on how to use the Docker image, visit the User Documentation.