Bitcoin Core v29.0
- Version: v29.1
- Tag: v29.1
- Release Date: 2025-09-05
- Docker Pull Command:
docker pull ghcr.io/mocacinno/mocacinno/bitcoin_core_docker:v29.1docker pull mocacinno/btc_core:v29.1
- Compiled by: Mocacinno
- Changelog: View Changelog
comments about the image
- nothing special
flags and parameters
starting the daemon
bash-4.4$ bitcoind -?
Bitcoin Core daemon version v29.1.0
The Bitcoin Core daemon (bitcoind) is a headless program that connects to the Bitcoin network to validate and relay transactions and blocks, as well as relaying addresses.
It provides the backbone of the Bitcoin network and its RPC, REST and ZMQ services can provide various transaction, block and address-related services.
There is an optional wallet component which provides transaction services.
It can be used in a headless environment or as part of a server setup.
Usage: bitcoind [options]
Options:
-alertnotify=<cmd>
Execute command when an alert is raised (%s in cmd is replaced by
message)
-allowignoredconf
For backwards compatibility, treat an unused bitcoin.conf file in the
datadir as a warning, not an error.
-assumevalid=<hex>
If this block is in the chain assume that it and its ancestors are valid
and potentially skip their script verification (0 to verify all,
default:
00000000000000000001b658dd1120e82e66d2790811f89ede9742ada3ed6d77,
testnet3:
00000000000003fc7967410ba2d0a8a8d50daedc318d43e8baf1a9782c236a57,
testnet4:
0000000000003ed4f08dbdf6f7d6b271a6bcffce25675cb40aa9fa43179a89f3,
signet:
000000895a110f46e59eb82bbc5bfb67fa314656009c295509c21b4999f5180a)
-blockfilterindex=<type>
Maintain an index of compact filters by block (default: 0, values:
basic). If <type> is not supplied or if <type> = 1, indexes for
all known types are enabled.
-blocknotify=<cmd>
Execute command when the best block changes (%s in cmd is replaced by
block hash)
-blockreconstructionextratxn=<n>
Extra transactions to keep in memory for compact block reconstructions
(default: 100)
-blocksdir=<dir>
Specify directory to hold blocks subdirectory for *.dat files (default:
<datadir>)
-blocksonly
Whether to reject transactions from network peers. Disables automatic
broadcast and rebroadcast of transactions, unless the source peer
has the 'forcerelay' permission. RPC transactions are not
affected. (default: 0)
-blocksxor
Whether an XOR-key applies to blocksdir *.dat files. The created XOR-key
will be zeros for an existing blocksdir or when `-blocksxor=0` is
set, and random for a freshly initialized blocksdir. (default: 1)
-coinstatsindex
Maintain coinstats index used by the gettxoutsetinfo RPC (default: 0)
-conf=<file>
Specify path to read-only configuration file. Relative paths will be
prefixed by datadir location (only useable from command line, not
configuration file) (default: bitcoin.conf)
-daemon
Run in the background as a daemon and accept commands (default: 0)
-daemonwait
Wait for initialization to be finished before exiting. This implies
-daemon (default: 0)
-datadir=<dir>
Specify data directory
-dbcache=<n>
Maximum database cache size <n> MiB (minimum 4, default: 450). Make sure
you have enough RAM. In addition, unused memory allocated to the
mempool is shared with this cache (see -maxmempool).
-debuglogfile=<file>
Specify location of debug log file (default: debug.log). Relative paths
will be prefixed by a net-specific datadir location. Pass
-nodebuglogfile to disable writing the log to a file.
-help
Print this help message and exit (also -h or -?)
-includeconf=<file>
Specify additional configuration file, relative to the -datadir path
(only useable from configuration file, not command line)
-loadblock=<file>
Imports blocks from external file on startup
-maxmempool=<n>
Keep the transaction memory pool below <n> megabytes (default: 300)
-maxorphantx=<n>
Keep at most <n> unconnectable transactions in memory (default: 100)
-mempoolexpiry=<n>
Do not keep transactions in the mempool longer than <n> hours (default:
336)
-par=<n>
Set the number of script verification threads (0 = auto, up to 15, <0 =
leave that many cores free, default: 0)
-persistmempool
Whether to save the mempool on shutdown and load on restart (default: 1)
-persistmempoolv1
Whether a mempool.dat file created by -persistmempool or the savemempool
RPC will be written in the legacy format (version 1) or the
current format (version 2). This temporary option will be removed
in the future. (default: 0)
-pid=<file>
Specify pid file. Relative paths will be prefixed by a net-specific
datadir location. (default: bitcoind.pid)
-prune=<n>
Reduce storage requirements by enabling pruning (deleting) of old
blocks. This allows the pruneblockchain RPC to be called to
delete specific blocks and enables automatic pruning of old
blocks if a target size in MiB is provided. This mode is
incompatible with -txindex. Warning: Reverting this setting
requires re-downloading the entire blockchain. (default: 0 =
disable pruning blocks, 1 = allow manual pruning via RPC, >=550 =
automatically prune block files to stay under the specified
target size in MiB)
-reindex
If enabled, wipe chain state and block index, and rebuild them from
blk*.dat files on disk. Also wipe and rebuild other optional
indexes that are active. If an assumeutxo snapshot was loaded,
its chainstate will be wiped as well. The snapshot can then be
reloaded via RPC.
-reindex-chainstate
If enabled, wipe chain state, and rebuild it from blk*.dat files on
disk. If an assumeutxo snapshot was loaded, its chainstate will
be wiped as well. The snapshot can then be reloaded via RPC.
-settings=<file>
Specify path to dynamic settings data file. Can be disabled with
-nosettings. File is written at runtime and not meant to be
edited by users (use bitcoin.conf instead for custom settings).
Relative paths will be prefixed by datadir location. (default:
settings.json)
-shutdownnotify=<cmd>
Execute command immediately before beginning shutdown. The need for
shutdown may be urgent, so be careful not to delay it long (if
the command doesn't require interaction with the server, consider
having it fork into the background).
-startupnotify=<cmd>
Execute command on startup.
-txindex
Maintain a full transaction index, used by the getrawtransaction rpc
call (default: 0)
-version
Print version and exit
Connection options:
-addnode=<ip>
Add a node to connect to and attempt to keep the connection open (see
the addnode RPC help for more info). This option can be specified
multiple times to add multiple nodes; connections are limited to
8 at a time and are counted separately from the -maxconnections
limit.
-asmap=<file>
Specify asn mapping used for bucketing of the peers (default:
ip_asn.map). Relative paths will be prefixed by the net-specific
datadir location.
-bantime=<n>
Default duration (in seconds) of manually configured bans (default:
86400)
-bind=<addr>[:<port>][=onion]
Bind to given address and always listen on it (default: 0.0.0.0). Use
[host]:port notation for IPv6. Append =onion to tag any incoming
connections to that address and port as incoming Tor connections
(default: 127.0.0.1:8334=onion, testnet3: 127.0.0.1:18334=onion,
testnet4: 127.0.0.1:48334=onion, signet: 127.0.0.1:38334=onion,
regtest: 127.0.0.1:18445=onion)
-cjdnsreachable
If set, then this host is configured for CJDNS (connecting to fc00::/8
addresses would lead us to the CJDNS network, see doc/cjdns.md)
(default: 0)
-connect=<ip>
Connect only to the specified node; -noconnect disables automatic
connections (the rules for this peer are the same as for
-addnode). This option can be specified multiple times to connect
to multiple nodes.
-discover
Discover own IP addresses (default: 1 when listening and no -externalip
or -proxy)
-dns
Allow DNS lookups for -addnode, -seednode and -connect (default: 1)
-dnsseed
Query for peer addresses via DNS lookup, if low on addresses (default: 1
unless -connect used or -maxconnections=0)
-externalip=<ip>
Specify your own public address
-fixedseeds
Allow fixed seeds if DNS seeds don't provide peers (default: 1)
-forcednsseed
Always query for peer addresses via DNS lookup (default: 0)
-i2pacceptincoming
Whether to accept inbound I2P connections (default: 1). Ignored if
-i2psam is not set. Listening for inbound I2P connections is done
through the SAM proxy, not by binding to a local address and
port.
-i2psam=<ip:port>
I2P SAM proxy to reach I2P peers and accept I2P connections (default:
none)
-listen
Accept connections from outside (default: 1 if no -proxy, -connect or
-maxconnections=0)
-listenonion
Automatically create Tor onion service (default: 1)
-maxconnections=<n>
Maintain at most <n> automatic connections to peers (default: 125). This
limit does not apply to connections manually added via -addnode
or the addnode RPC, which have a separate limit of 8.
-maxreceivebuffer=<n>
Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
-maxsendbuffer=<n>
Maximum per-connection memory usage for the send buffer, <n>*1000 bytes
(default: 1000)
-maxuploadtarget=<n>
Tries to keep outbound traffic under the given target per 24h. Limit
does not apply to peers with 'download' permission or blocks
created within past week. 0 = no limit (default: 0M). Optional
suffix units [k|K|m|M|g|G|t|T] (default: M). Lowercase is 1000
base while uppercase is 1024 base
-natpmp
Use PCP or NAT-PMP to map the listening port (default: 0)
-networkactive
Enable all P2P network activity (default: 1). Can be changed by the
setnetworkactive RPC command
-onion=<ip:port|path>
Use separate SOCKS5 proxy to reach peers via Tor onion services, set
-noonion to disable (default: -proxy). May be a local file path
prefixed with 'unix:'.
-onlynet=<net>
Make automatic outbound connections only to network <net> (ipv4, ipv6,
onion, i2p, cjdns). Inbound and manual connections are not
affected by this option. It can be specified multiple times to
allow multiple networks.
-peerblockfilters
Serve compact block filters to peers per BIP 157 (default: 0)
-peerbloomfilters
Support filtering of blocks and transaction with bloom filters (default:
0)
-port=<port>
Listen for connections on <port> (default: 8333, testnet3: 18333,
testnet4: 48333, signet: 38333, regtest: 18444). Not relevant for
I2P (see doc/i2p.md). If set to a value x, the default onion
listening port will be set to x+1.
-proxy=<ip:port|path>
Connect through SOCKS5 proxy, set -noproxy to disable (default:
disabled). May be a local file path prefixed with 'unix:' if the
proxy supports it.
-proxyrandomize
Randomize credentials for every proxy connection. This enables Tor
stream isolation (default: 1)
-seednode=<ip>
Connect to a node to retrieve peer addresses, and disconnect. This
option can be specified multiple times to connect to multiple
nodes. During startup, seednodes will be tried before dnsseeds.
-timeout=<n>
Specify socket connection timeout in milliseconds. If an initial attempt
to connect is unsuccessful after this amount of time, drop it
(minimum: 1, default: 5000)
-torcontrol=<ip>:<port>
Tor control host and port to use if onion listening enabled (default:
127.0.0.1:9051). If no port is specified, the default port of
9051 will be used.
-torpassword=<pass>
Tor control port password (default: empty)
-v2transport
Support v2 transport (default: 1)
-whitebind=<[permissions@]addr>
Bind to the given address and add permission flags to the peers
connecting to it. Use [host]:port notation for IPv6. Allowed
permissions: bloomfilter (allow requesting BIP37 filtered blocks
and transactions), noban (do not ban for misbehavior; implies
download), forcerelay (relay transactions that are already in the
mempool; implies relay), relay (relay even in -blocksonly mode,
and unlimited transaction announcements), mempool (allow
requesting BIP35 mempool contents), download (allow getheaders
during IBD, no disconnect after maxuploadtarget limit), addr
(responses to GETADDR avoid hitting the cache and contain random
records with the most up-to-date info). Specify multiple
permissions separated by commas (default:
download,noban,mempool,relay). Can be specified multiple times.
-whitelist=<[permissions@]IP address or network>
Add permission flags to the peers using the given IP address (e.g.
1.2.3.4) or CIDR-notated network (e.g. 1.2.3.0/24). Uses the same
permissions as -whitebind. Additional flags "in" and "out"
control whether permissions apply to incoming connections and/or
manual (default: incoming only). Can be specified multiple times.
Wallet options:
-addresstype
What type of addresses to use ("legacy", "p2sh-segwit", "bech32", or
"bech32m", default: "bech32")
-avoidpartialspends
Group outputs by address, selecting many (possibly all) or none, instead
of selecting on a per-output basis. Privacy is improved as
addresses are mostly swept with fewer transactions and outputs
are aggregated in clean change addresses. It may result in higher
fees due to less optimal coin selection caused by this added
limitation and possibly a larger-than-necessary number of inputs
being used. Always enabled for wallets with "avoid_reuse"
enabled, otherwise default: 0.
-changetype
What type of change to use ("legacy", "p2sh-segwit", "bech32", or
"bech32m"). Default is "legacy" when -addresstype=legacy, else it
is an implementation detail.
-consolidatefeerate=<amt>
The maximum feerate (in BTC/kvB) at which transaction building may use
more inputs than strictly necessary so that the wallet's UTXO
pool can be reduced (default: 0.0001).
-disablewallet
Do not load the wallet and disable wallet RPC calls
-discardfee=<amt>
The fee rate (in BTC/kvB) that indicates your tolerance for discarding
change by adding it to the fee (default: 0.0001). Note: An output
is discarded if it is dust at this rate, but we will always
discard up to the dust relay fee and a discard fee above that is
limited by the fee estimate for the longest target
-fallbackfee=<amt>
A fee rate (in BTC/kvB) that will be used when fee estimation has
insufficient data. 0 to entirely disable the fallbackfee feature.
(default: 0.00)
-keypool=<n>
Set key pool size to <n> (default: 1000). Warning: Smaller sizes may
increase the risk of losing funds when restoring from an old
backup, if none of the addresses in the original keypool have
been used.
-maxapsfee=<n>
Spend up to this amount in additional (absolute) fees (in BTC) if it
allows the use of partial spend avoidance (default: 0.00)
-mintxfee=<amt>
Fee rates (in BTC/kvB) smaller than this are considered zero fee for
transaction creation (default: 0.00001)
-paytxfee=<amt>
Fee rate (in BTC/kvB) to add to transactions you send (default: 0.00)
-signer=<cmd>
External signing tool, see doc/external-signer.md
-spendzeroconfchange
Spend unconfirmed change when sending transactions (default: 1)
-txconfirmtarget=<n>
If paytxfee is not set, include enough fee so transactions begin
confirmation on average within n blocks (default: 6)
-wallet=<path>
Specify wallet path to load at startup. Can be used multiple times to
load multiple wallets. Path is to a directory containing wallet
data and log files. If the path is not absolute, it is
interpreted relative to <walletdir>. This only loads existing
wallets and does not create new ones. For backwards compatibility
this also accepts names of existing top-level data files in
<walletdir>.
-walletbroadcast
Make the wallet broadcast transactions (default: 1)
-walletdir=<dir>
Specify directory to hold wallets (default: <datadir>/wallets if it
exists, otherwise <datadir>)
-walletnotify=<cmd>
Execute command when a wallet transaction changes. %s in cmd is replaced
by TxID, %w is replaced by wallet name, %b is replaced by the
hash of the block including the transaction (set to 'unconfirmed'
if the transaction is not included) and %h is replaced by the
block height (-1 if not included). %w is not currently
implemented on windows. On systems where %w is supported, it
should NOT be quoted because this would break shell escaping used
to invoke the command.
-walletrbf
Send transactions with full-RBF opt-in enabled (RPC only, default: 1)
ZeroMQ notification options:
-zmqpubhashblock=<address>
Enable publish hash block in <address>
-zmqpubhashblockhwm=<n>
Set publish hash block outbound message high water mark (default: 1000)
-zmqpubhashtx=<address>
Enable publish hash transaction in <address>
-zmqpubhashtxhwm=<n>
Set publish hash transaction outbound message high water mark (default:
1000)
-zmqpubrawblock=<address>
Enable publish raw block in <address>
-zmqpubrawblockhwm=<n>
Set publish raw block outbound message high water mark (default: 1000)
-zmqpubrawtx=<address>
Enable publish raw transaction in <address>
-zmqpubrawtxhwm=<n>
Set publish raw transaction outbound message high water mark (default:
1000)
-zmqpubsequence=<address>
Enable publish hash block and tx sequence in <address>
-zmqpubsequencehwm=<n>
Set publish hash sequence message high water mark (default: 1000)
Debugging/Testing options:
-debug=<category>
Output debug and trace logging (default: -nodebug, supplying <category>
is optional). If <category> is not supplied or if <category> is 1
or "all", output all debug logging. If <category> is 0 or "none",
any other categories are ignored. Other valid values for
<category> are: addrman, bench, blockstorage, cmpctblock, coindb,
estimatefee, http, i2p, ipc, leveldb, libevent, mempool,
mempoolrej, net, proxy, prune, qt, rand, reindex, rpc, scan,
selectcoins, tor, txpackages, txreconciliation, validation,
walletdb, zmq. This option can be specified multiple times to
output multiple categories.
-debugexclude=<category>
Exclude debug and trace logging for a category. Can be used in
conjunction with -debug=1 to output debug and trace logging for
all categories except the specified category. This option can be
specified multiple times to exclude multiple categories. This
takes priority over "-debug"
-help-debug
Print help message with debugging options and exit
-logips
Include IP addresses in debug output (default: 0)
-loglevelalways
Always prepend a category and level (default: 0)
-logsourcelocations
Prepend debug output with name of the originating source location
(source file, line number and function name) (default: 0)
-logthreadnames
Prepend debug output with name of the originating thread (default: 0)
-logtimestamps
Prepend debug output with timestamp (default: 1)
-maxtxfee=<amt>
Maximum total fees (in BTC) to use in a single wallet transaction;
setting this too low may abort large transactions (default: 0.10)
-printtoconsole
Send trace/debug info to console (default: 1 when no -daemon. To disable
logging to file, set -nodebuglogfile)
-shrinkdebugfile
Shrink debug.log file on client startup (default: 1 when no -debug)
-uacomment=<cmt>
Append comment to the user agent string
Chain selection options:
-chain=<chain>
Use the chain <chain> (default: main). Allowed values: main, test,
testnet4, signet, regtest
-signet
Use the signet chain. Equivalent to -chain=signet. Note that the network
is defined by the -signetchallenge parameter
-signetchallenge
Blocks must satisfy the given script to be considered valid (only for
signet networks; defaults to the global default signet test
network challenge)
-signetseednode
Specify a seed node for the signet network, in the hostname[:port]
format, e.g. sig.net:1234 (may be used multiple times to specify
multiple seed nodes; defaults to the global default signet test
network seed node(s))
-testnet
Use the testnet3 chain. Equivalent to -chain=test. Support for testnet3
is deprecated and will be removed in an upcoming release.
Consider moving to testnet4 now by using -testnet4.
-testnet4
Use the testnet4 chain. Equivalent to -chain=testnet4.
Node relay options:
-bytespersigop
Equivalent bytes per sigop in transactions for relay and mining
(default: 20)
-datacarrier
Relay and mine data carrier transactions (default: 1)
-datacarriersize
Relay and mine transactions whose data-carrying raw scriptPubKey is of
this size or less (default: 83)
-minrelaytxfee=<amt>
Fees (in BTC/kvB) smaller than this are considered zero fee for
relaying, mining and transaction creation (default: 0.000001)
-permitbaremultisig
Relay transactions creating non-P2SH multisig outputs (default: 1)
-whitelistforcerelay
Add 'forcerelay' permission to whitelisted peers with default
permissions. This will relay transactions even if the
transactions were already in the mempool. (default: 0)
-whitelistrelay
Add 'relay' permission to whitelisted peers with default permissions.
This will accept relayed transactions even when not relaying
transactions (default: 1)
Block creation options:
-blockmaxweight=<n>
Set maximum BIP141 block weight (default: 4000000)
-blockmintxfee=<amt>
Set lowest fee rate (in BTC/kvB) for transactions to be included in
block creation. (default: 0.00000001)
-blockreservedweight=<n>
Reserve space for the fixed-size block header plus the largest coinbase
transaction the mining software may add to the block. (default:
8000).
RPC server options:
-rest
Accept public REST requests (default: 0)
-rpcallowip=<ip>
Allow JSON-RPC connections from specified source. Valid values for <ip>
are a single IP (e.g. 1.2.3.4), a network/netmask (e.g.
1.2.3.4/255.255.255.0), a network/CIDR (e.g. 1.2.3.4/24), all
ipv4 (0.0.0.0/0), or all ipv6 (::/0). This option can be
specified multiple times
-rpcauth=<userpw>
Username and HMAC-SHA-256 hashed password for JSON-RPC connections. The
field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
canonical python script is included in share/rpcauth. The client
then connects normally using the
rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
option can be specified multiple times
-rpcbind=<addr>[:port]
Bind to given address to listen for JSON-RPC connections. Do not expose
the RPC server to untrusted networks such as the public internet!
This option is ignored unless -rpcallowip is also passed. Port is
optional and overrides -rpcport. Use [host]:port notation for
IPv6. This option can be specified multiple times (default:
127.0.0.1 and ::1 i.e., localhost)
-rpccookiefile=<loc>
Location of the auth cookie. Relative paths will be prefixed by a
net-specific datadir location. (default: data dir)
-rpccookieperms=<readable-by>
Set permissions on the RPC auth cookie file so that it is readable by
[owner|group|all] (default: owner [via umask 0077])
-rpcpassword=<pw>
Password for JSON-RPC connections
-rpcport=<port>
Listen for JSON-RPC connections on <port> (default: 8332, testnet3:
18332, testnet4: 48332, signet: 38332, regtest: 18443)
-rpcthreads=<n>
Set the number of threads to service RPC calls (default: 16)
-rpcuser=<user>
Username for JSON-RPC connections
-rpcwhitelist=<whitelist>
Set a whitelist to filter incoming RPC calls for a specific user. The
field <whitelist> comes in the format: <USERNAME>:<rpc 1>,<rpc
2>,...,<rpc n>. If multiple whitelists are set for a given user,
they are set-intersected. See -rpcwhitelistdefault documentation
for information on default whitelist behavior.
-rpcwhitelistdefault
Sets default behavior for rpc whitelisting. Unless rpcwhitelistdefault
is set to 0, if any -rpcwhitelist is set, the rpc server acts as
if all rpc users are subject to empty-unless-otherwise-specified
whitelists. If rpcwhitelistdefault is set to 1 and no
-rpcwhitelist is set, rpc server acts as if all rpc users are
subject to empty whitelists.
-server
Accept command line and JSON-RPC commands
using bitcoind
bash-4.4$ bitcoin-cli help
== Blockchain ==
dumptxoutset "path" ( "type" {"rollback":n,...} )
getbestblockhash
getblock "blockhash" ( verbosity )
getblockchaininfo
getblockcount
getblockfilter "blockhash" ( "filtertype" )
getblockfrompeer "blockhash" peer_id
getblockhash height
getblockheader "blockhash" ( verbose )
getblockstats hash_or_height ( stats )
getchainstates
getchaintips
getchaintxstats ( nblocks "blockhash" )
getdeploymentinfo ( "blockhash" )
getdescriptoractivity ( ["blockhash",...] [scanobjects,...] include_mempool )
getdifficulty
getmempoolancestors "txid" ( verbose )
getmempooldescendants "txid" ( verbose )
getmempoolentry "txid"
getmempoolinfo
getrawmempool ( verbose mempool_sequence )
gettxout "txid" n ( include_mempool )
gettxoutproof ["txid",...] ( "blockhash" )
gettxoutsetinfo ( "hash_type" hash_or_height use_index )
gettxspendingprevout [{"txid":"hex","vout":n},...]
importmempool "filepath" ( options )
loadtxoutset "path"
preciousblock "blockhash"
pruneblockchain height
savemempool
scanblocks "action" ( [scanobjects,...] start_height stop_height "filtertype" options )
scantxoutset "action" ( [scanobjects,...] )
verifychain ( checklevel nblocks )
verifytxoutproof "proof"
== Control ==
getmemoryinfo ( "mode" )
getrpcinfo
help ( "command" )
logging ( ["include_category",...] ["exclude_category",...] )
stop
uptime
== Mining ==
getblocktemplate {"mode":"str","capabilities":["str",...],"rules":["segwit","str",...],"longpollid":"str","data":"hex"}
getmininginfo
getnetworkhashps ( nblocks height )
getprioritisedtransactions
prioritisetransaction "txid" ( dummy ) fee_delta
submitblock "hexdata" ( "dummy" )
submitheader "hexdata"
== Network ==
addnode "node" "command" ( v2transport )
clearbanned
disconnectnode ( "address" nodeid )
getaddednodeinfo ( "node" )
getaddrmaninfo
getconnectioncount
getnettotals
getnetworkinfo
getnodeaddresses ( count "network" )
getpeerinfo
listbanned
ping
setban "subnet" "command" ( bantime absolute )
setnetworkactive state
== Rawtransactions ==
analyzepsbt "psbt"
combinepsbt ["psbt",...]
combinerawtransaction ["hexstring",...]
converttopsbt "hexstring" ( permitsigdata iswitness )
createpsbt [{"txid":"hex","vout":n,"sequence":n},...] [{"address":amount,...},{"data":"hex"},...] ( locktime replaceable )
createrawtransaction [{"txid":"hex","vout":n,"sequence":n},...] [{"address":amount,...},{"data":"hex"},...] ( locktime replaceable )
decodepsbt "psbt"
decoderawtransaction "hexstring" ( iswitness )
decodescript "hexstring"
descriptorprocesspsbt "psbt" ["",{"desc":"str","range":n or [n,n]},...] ( "sighashtype" bip32derivs finalize )
finalizepsbt "psbt" ( extract )
fundrawtransaction "hexstring" ( options iswitness )
getrawtransaction "txid" ( verbosity "blockhash" )
joinpsbts ["psbt",...]
sendrawtransaction "hexstring" ( maxfeerate maxburnamount )
signrawtransactionwithkey "hexstring" ["privatekey",...] ( [{"txid":"hex","vout":n,"scriptPubKey":"hex","redeemScript":"hex","witnessScript":"hex","amount":amount},...] "sighashtype" )
submitpackage ["rawtx",...] ( maxfeerate maxburnamount )
testmempoolaccept ["rawtx",...] ( maxfeerate )
utxoupdatepsbt "psbt" ( ["",{"desc":"str","range":n or [n,n]},...] )
== Signer ==
enumeratesigners
== Util ==
createmultisig nrequired ["key",...] ( "address_type" )
deriveaddresses "descriptor" ( range )
estimatesmartfee conf_target ( "estimate_mode" )
getdescriptorinfo "descriptor"
getindexinfo ( "index_name" )
signmessagewithprivkey "privkey" "message"
validateaddress "address"
verifymessage "address" "signature" "message"
== Wallet ==
abandontransaction "txid"
abortrescan
addmultisigaddress nrequired ["key",...] ( "label" "address_type" )
backupwallet "destination"
bumpfee "txid" ( options )
createwallet "wallet_name" ( disable_private_keys blank "passphrase" avoid_reuse descriptors load_on_startup external_signer )
createwalletdescriptor "type" ( {"internal":bool,"hdkey":"str",...} )
dumpprivkey "address"
dumpwallet "filename"
encryptwallet "passphrase"
getaddressesbylabel "label"
getaddressinfo "address"
getbalance ( "dummy" minconf include_watchonly avoid_reuse )
getbalances
gethdkeys ( {"active_only":bool,"private":bool,...} )
getnewaddress ( "label" "address_type" )
getrawchangeaddress ( "address_type" )
getreceivedbyaddress "address" ( minconf include_immature_coinbase )
getreceivedbylabel "label" ( minconf include_immature_coinbase )
gettransaction "txid" ( include_watchonly verbose )
getunconfirmedbalance
getwalletinfo
importaddress "address" ( "label" rescan p2sh )
importdescriptors requests
importmulti requests ( options )
importprivkey "privkey" ( "label" rescan )
importprunedfunds "rawtransaction" "txoutproof"
importpubkey "pubkey" ( "label" rescan )
importwallet "filename"
keypoolrefill ( newsize )
listaddressgroupings
listdescriptors ( private )
listlabels ( "purpose" )
listlockunspent
listreceivedbyaddress ( minconf include_empty include_watchonly "address_filter" include_immature_coinbase )
listreceivedbylabel ( minconf include_empty include_watchonly include_immature_coinbase )
listsinceblock ( "blockhash" target_confirmations include_watchonly include_removed include_change "label" )
listtransactions ( "label" count skip include_watchonly )
listunspent ( minconf maxconf ["address",...] include_unsafe query_options )
listwalletdir
listwallets
loadwallet "filename" ( load_on_startup )
lockunspent unlock ( [{"txid":"hex","vout":n},...] persistent )
migratewallet ( "wallet_name" "passphrase" )
newkeypool
psbtbumpfee "txid" ( options )
removeprunedfunds "txid"
rescanblockchain ( start_height stop_height )
restorewallet "wallet_name" "backup_file" ( load_on_startup )
send [{"address":amount,...},{"data":"hex"},...] ( conf_target "estimate_mode" fee_rate options )
sendall ["address",{"address":amount,...},...] ( conf_target "estimate_mode" fee_rate options )
sendmany ( "" ) {"address":amount,...} ( minconf "comment" ["address",...] replaceable conf_target "estimate_mode" fee_rate verbose )
sendtoaddress "address" amount ( "comment" "comment_to" subtractfeefromamount replaceable conf_target "estimate_mode" avoid_reuse fee_rate verbose )
sethdseed ( newkeypool "seed" )
setlabel "address" "label"
settxfee amount
setwalletflag "flag" ( value )
signmessage "address" "message"
signrawtransactionwithwallet "hexstring" ( [{"txid":"hex","vout":n,"scriptPubKey":"hex","redeemScript":"hex","witnessScript":"hex","amount":amount},...] "sighashtype" )
simulaterawtransaction ( ["rawtx",...] {"include_watchonly":bool,...} )
unloadwallet ( "wallet_name" load_on_startup )
upgradewallet ( version )
walletcreatefundedpsbt ( [{"txid":"hex","vout":n,"sequence":n,"weight":n},...] ) [{"address":amount,...},{"data":"hex"},...] ( locktime options bip32derivs )
walletdisplayaddress "address"
walletlock
walletpassphrase "passphrase" timeout
walletpassphrasechange "oldpassphrase" "newpassphrase"
walletprocesspsbt "psbt" ( sign "sighashtype" bip32derivs finalize )
== Zmq ==
getzmqnotifications
navigation
For more information on how to use the Docker image, visit the User Documentation.